Bearing capacity of UHPC‐NC connection structure in negative moment zone of PC beam bridges.

A new type of UHPC‐NC (normal concrete) structure in the negative moment zone was proposed to improve the bearing capacity of the connection structure in the negative moment zone of prefabricated prestressed concrete (PC) beam bridges. First, the distribution characteristics of the crack, cracking load, ultimate moment, and ductility coefficient of the new structure were obtained by the 1:4 scale model tests. The feasibility of the connection structure is verified. Then, the value ranges of critical structural parameters affecting the bearing capacity of the connection structure based on the plane section assumption analysis, including the reasonable thickness of the UHPC layer, the reinforcement ratio of the longitudinal tensile reinforcement, and the diameter of the reinforcement, are obtained. At the same time, based on the verification of the finite element model, the influence of crucial research parameters on the bending capacity of the connection structure is obtained by using the finite element method. Finally, a theoretical method for the bending moment capacity of the connection structure of the UHPC‐NC structure is proposed, considering the high ductility characteristics of UHPC materials. The average relative error between the calculation results and the finite element method is within 7.2%, which verifies the reliability of the calculation method in this paper and provides a reference for its design and engineering application. [ABSTRACT FROM AUTHOR]